Levelit Clips | 1mm | 250 pieces

Step 1: Always have enough adhesive and place the first tile. Make sure the first tile is completely level.

Step 2: Slide the clip(s) under the tile and tap the tile. Place the next tile after you have applied the clips. Place this tile on top of the clip base.

Step 3: Slide the wedge through the opening of the clip. Use the leveling pliers to push the wedge through the clip with enough force until the tile is level. TIP: Do not remove the wedge yet.

Step 4: Leave the wedge in place for 24 hours after fixing and once the tile adhesive has hardened, the clip and wedge can be easily removed with a rubber mallet or your foot. TIP: Always break in the direction of the joint.

Step 5: Remove the wedges from the clips, they can be reused.

- Ideal for large format tiles
- Keeps breaking off above the foot
- Easy installation (wedge system)
- Automatic constant joint width
- Suitable for both floor and wall tiles
- The wedges are reusable due to the sturdy material
- T shape at the bottom of the clip base ensures that the clip stays in place

Algemeen

Product: Levelit Clips | 1mm | 250 pieces

EAN / barcode: 5430000539012

Brand: Levelit

To be used with: Levelit wedges and pliers

-

Technisch

Material: Polypropylene

Tile thickness: 3-12mm thick tiles (3-6mm use wedge separator)

-

Verpakking

Package weight: 0.75 kg

Package size: L 43cm - D 6cm - W 30cm

Packaging: A bag with 250 Levelit spacer clips in joint width 1mm

• For orders over €155,- you will receive a 5% discount.

• For orders over €250, you will receive a 10% discount.

• For orders over €500, you will receive a 20% discount.