Levelit Set | 1mm | 250 pieces

1. Always ensure there is sufficient adhesive and place the tile.
2. Place the first tile completely level. Then place clips under the tile.
3. Place a tile on top of the clip foot. Slide the wedge through the opening of the clip.
4. The wedge can be pressed by hand until the tile is flat. Fix the wedge with pliers. Do not remove the wedge before breaking the clips.
6. After the adhesive has cured, the clips and wedges can be removed by kicking the side in the direction of the joint.
Tip: When using a rubber mallet, the clips and wedges can be removed by hitting against the direction of the joint.
Tip: Breaking down is only done with a sideways movement.

- Always the right amount of clips and wedges.
- By only using first-choice plastic granules, the quality is very stable.
- The specific design creates a fracture at the bottom of the foot.
- Reusable bucket.
- Highly durable and reusable wedges.
- The large pressure surface ensures better pressure distribution and prevents tile breakage.

Algemeen

EAN code: 5430000539340

Brand: Levelit

-

Technisch

Tile thickness: min. 3 mm to max. 12 mm (3-6mm use wedges seperator)

-

Verpakking

Weight: 3.9kg / bucket

Size: L 32cm - D 27cm - W 27cm

Packaging: 1 Reusable set with 250 clips in joint width 1mm + 250 reusable wedges + 1 plastic pliers. Suitable for tiles between 6 and 12mm.

• For orders over €155,- you will receive a 5% discount.

• For orders over €250, you will receive a 10% discount.

• For orders over €500, you will receive a 20% discount.